EG4 BRIGHTMOUNT - Rail Assembly and Splice Connectors

EG4 ELECTRONICS | INSTALLATION GUIDE
7
www.eg4electronics.com
Version 1.0.0 | Specifications subject to change without notice.
© 2023 EG4 Electronics, LLC. All rights reserved.
INSTALLATION
B) Rail Assembly
Follow the diagrams to secure the
rails to the previously installed L feet.
Use the splice connectors to join rail
sections together, leaving a 0.1 – 0.2
in. (3 – 5 mm) expansion gap between
rail joints.
Completed rail
assembly.