EG4 BRIGHTMOUNT User Manual

EG4 ELECTRONICS | INSTALLATION GUIDE
EG4 BRIGHTMOUNT
ADJUSTABLE GROUND MOUNT SYSTEM
PARTS
1
www.eg4electronics.com
Version 1.0.0 | Specifications subject to change without notice.
© 2023 EG4 Electronics, LLC. All rights reserved.
2) Mid Clamp
3) End Clamp
4) Mount Group 5) Grounding Lug Group 6) Grounding Clip
7) Anchor Bolt
M10*100
8) L Foot Group
9) Splice Connector and
Bonding Jumper
1) Rack Rail

EG4 BRIGHTMOUNT Specifications

General

Adjustable Tilt	Yes
Color	Silver
Material	Aluminum
Mounting Type	Ground Mount
Compatibility	Most framed solar panels

Summary

Parts List

Dimensions and Layout

Engineering Drawings and Dimensions

Detailed technical drawings showing system dimensions, panel layout, and height specifications for the ground mount.

Layout and Installation Overview

Overall Layout and Tools

Visual representation of the complete system layout, including component placement and tools required for installation.

Installation Procedures

Leg Group Assembly

Instructions and diagrams for assembling the leg groups using specified bolts and washers for structural support.

Angle Adjustment

Guide for adjusting the array tilt angle using set screws, with a chart relating length to angle.

L Feet and Anchor Bolt Installation

Steps for attaching L feet to mounting brackets and securing them to concrete anchors using anchor bolts.

Rail Assembly and Splice Connectors

Instructions for securing rails to L feet and joining rail sections using splice connectors with an expansion gap.

PV Module Attachment and Grounding

Procedure for mounting PV modules onto rails using clamps and grounding clips, and installing grounding lugs.