Egnater Rebel-30 Head User Manual

REBEL
-
30
HEAD
Owner’s Manual

Egnater Rebel-30 Head Specifications

Power

power output	30 watts
impedance	4, 8 or 16 ohms
international voltage selector	Yes

Speaker Configuration

rebel 30 1x12 speaker	One Egnater Elite 80
rebel 30 2x12 speakers	One Egnater Elite 80 and One Celestion Vintage 30

Channels

clean channel controls	Volume, Treble, Bass, Tight and Bright switches, 1 to 30 Watts Control, Reverb Level with “spillover”
overdrive channel controls	Gain, Treble, Middle, Bass, Volume, Tight and Bright switches, 1 to 30 Watts control, Reverb Level with “spillover”

Tubes

12AX7 tubes	Five
EL84 tubes	Two
6V6 tubes	Two

Weight and Dimensions

weight	10.5 kg
width	17 inches
depth	10.75 inches
height	8.5 inches

Summary

Rebel-30 Overview

Important Information

Follow These Safety Precautions

Front Panel Controls

Guitar Input and Channel Select

Channel 1 Controls

Explanation of Channel 1's LED, TIGHT, BRIGHT, VOLUME, Tone Controls, and WATTS knob.

Channel 2 Controls

Quick Start Guide

Tube Mix Control

Rear Panel Connections and Features

Power Supply and Voltage Selection

Details on the AC power switch, inlet, fuse, and voltage selector.

Fuse and Tube Troubleshooting

Information on the 315mA fast-blow fuse and troubleshooting tube issues.

Footswitch and Speaker Outputs

Explanation of the footswitch jack and main/extension speaker outputs.

Rear Panel Features Explained

Impedance and Record Line Out

Settings for the impedance switch and operation of the record line out.

Reverb Levels and Effects Loop

Details on channel reverb controls and the effects loop send/return jacks.

Speaker Hookup Guide

Limited Warranty Information

Specifications