Need help?Do you have a question about the Egnater VENGEANCE and is the answer not in the manual?
General| Type | Tube |
|---|---|
| Wattage | 120W |
| Channels | 2 |
| Effects Loop | Yes |
| Footswitch | Yes |
| Preamp Tubes | 6 x 12AX7 |
| Power Tubes | 4 x 6L6 |
| Reverb | No |
| Speaker Output | 4, 8, 16 ohms |
| Tubes | 6 x 12AX7, 4 x 6L6 |
| Total Power | 120W |
| Number of Channels | 2 |
| EQ | 3-band EQ |
| Controls | Gain, Volume, Bass, Mid, Treble, Presence |
| Power Output | 120 Watts |
Information on connecting the power cord and setting the correct voltage.
Explains the function of various jacks for footswitch and external controls.
Overview of the power tube bias adjustment controls and their purpose.
Instructions for connecting speaker cabinets and setting impedance.
Details on the cabinet-simulated line out and the effects loop functionality.
Table of recommended bias settings for various tube types.
Explanation of features like fast-blow fuses and self-protection.
To Next Page
