Need help?Do you have a question about the Egnater Tweaker and is the answer not in the manual?
General| Power Output | 15 Watts |
|---|---|
| Power Tubes | 2 x EL84 |
| Preamp Tubes | 3 x 12AX7 |
| Channels | 1 |
| Effects Loop | Yes |
| Controls | Gain, Bass, Middle, Treble |
| Impedance | 8 Ohm, 16 Ohm |
| Type | Tube |
| Inputs | 1 x 1/4" |
Essential safety information and warnings for operating the amplifier.
Comprehensive safety instructions, warnings, and precautions for amplifier operation and maintenance.
Diagram showing the placement of preamp and power tubes on the chassis.
Explanation of the amplifier's controls and their functions for initial setup.
Recommended knob settings for achieving a "Shimmering Clean" tone using AC voicing.
Recommended knob settings for achieving a "California Clean" tone using USA voicing.
Recommended knob settings for achieving a "British Clean" tone using BRIT voicing.
Recommended knob settings for a soft compression tone.
Recommended knob settings for a smooth, jazzy clean tone.
Recommended knob settings for a rock crunch tone.
Recommended knob settings for a metal tone suitable for practice.
Recommended knob settings for a searing solo tone.
Explanation of the insert patch point for external effects and level setting.
Details on connecting speakers, including main and extension outputs and impedance settings.
Information on the fuse, AC voltage selector, and power inlet.
Diagrams and instructions for connecting speakers to the Tweaker Head or 112 Combo.
Diagrams and instructions for connecting a Tweaker 112X with an Egnater 212X cabinet.
Diagrams and instructions for connecting a Tweaker 112X with an Egnater 4x12A/B cabinet.
Details the three-year warranty for Egnater amplifiers, combos, and speaker cabinets.
Covers the 90-day tube warranty and the process for returning defective products.
Provides customer support hours, contact numbers, and company address.
To Next Page
