Ego Power+ ZERO TURN Z6 - Battery and Overload Status Codes; Battery Compartment Icons; Overload Indicator Faults

72 ZERO TURN RIDE-ON MOWER — ZT4200E-S
EN
LCD
Display
Description
Fault
Cod
e on
LCD
Mower
Status
Indicator
Beeper Cause Solution
The icon of a certain
battery compartment
blinks.
n/a OFF No
A certain
battery during
discharging is
over-current.
No action is needed.
The mower can
continue working if the
combined battery Ah
rating, over-current
battery excluded, meets
the requirement. Once
the over-current battery
returns to normal, it will
join in powering the
mower immediately and
the icon will disappear.
The icon of the empty
battery compartment
blinks
n/a OFF No
Battery capacity
is not sufficient to
allow the mower
to work.
In order to start this
mower, use enough
EGO batteries
following the
instructions in section
“ATTACHING/
DETACHING THE
BATTERY PACK” in
this manual.
The overload indicator
blinks
n/a
Flashe
s red
One beep
The blade motor
is overloaded.
Raise the deck cutting
height or slow the
driving speed to reduce
the load of the mower.
The side
discharge chute
is clogged with
grass and debris.
Clean the side
discharge chute after
each use.
There is an
interference
between the
blade and the
mower deck.
Call EGO
Customer Service
Center