BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC 29
MAINTENANCE
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING: Battery machines do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. To prevent serious personal injury,
take extra precautions and care when performing maintenance, service or for changing
the cutting attachment or other attachments.
WARNING: To prevent serious personal injury, remove the battery pack from
the power head before servicing, cleaning, changing add-on attachments or when the
product is not in use.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use a clean cloth to remove dirt, dust, oil, grease, etc.
WARNING: When cleaning the machine, DO NOT immerse in water or other
liquids.
CLEANING THE UNIT
◾
Remove the battery.
◾
After each use, clean the debris, clogged soils or grass on the blade and guard
with a soft brush.
◾
Wipe the machine surface with a clean cloth moistened with a mild soap solution.
◾
Use a small brush or a small vacuum cleaner to clean the air vents on the rear
housing.
◾
Keep the air vents free of obstructions.
When the blade becomes dull or both edges of the blade are dull, please have it
sharpened by a qualified service technician or replace it with a new one if necessary.
To Next Page
Loading...
Need help?
General
