BRUSH CUTTER ATTACHMENT — BCA1220/BCA1220-FC18
ASSEMBLY
WARNING: If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product with damaged or missing
parts could result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not
recommended for use with this brush cutter. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possibly serious personal
injury.
WARNING: Always wear heavy gloves when installing or removing the
blade or the guard or doing any maintenance on the blade. Be careful of the blade
and protect your hands from being injured by the blade.
WARNING: Do not connect to power head until assembly is complete.
Failure to comply could result in accidental starting and possible serious personal
injury.
UNPACKING
◾
This product requires assembly.
◾
Carefully remove the product and any accessories from the box. Make sure that
all items listed in the packing list are included.
WARNING: Do not use this product if any parts on the Packing List are already
assembled to your product when you unpack it. Parts on this list are not assembled to
the product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
◾
Inspect the machine carefully to make sure that no breakage or damage occurred
during shipping.
◾
Do not discard the packing material until you have carefully inspected and
satisfactorily operated the machine.
◾
If any parts are damaged or missing, please return the product to the place of
purchase.
NOTICE: The correct assembly sequence of the brush cutter attachment is mounting
the guard first, and then the blade, and finally attaching it to the power head.
To Next Page
Loading...
Need help?
General
