EGO CH5500 - User Manual

Other manuals for EGO CH5500

Operator's Manual64 pages

Questions and Answers

C
Charles GuzmanJul 29, 2025
What to do if my EGO charger doesn’t work and the LED1 flashes red?
- P
  Paul RuizJul 29, 2025
  If your EGO charger isn't working and LED1 is flashing red, it could indicate a defective battery pack or charger, or a poor connection. Try the following: 1. Remove and reinsert the battery pack into the charger. 2. Try charging a different battery pack to see if the issue persists. 3. Unplug the charger, wait for the red LED to turn off completely, and then reconnect it to the power supply.
K
kellycraigAug 5, 2025
Why is my EGO charger not working and LED1 is red?
- K
  kevin39Aug 5, 2025
  If your EGO charger isn't working and the LED1 is shining red, it's likely that the battery pack is either too hot or too cold. Allow the battery pack to reach normal temperature. Charging will commence once the battery pack's temperature is between 37°F (3°C) and 135°F (57°C).
L
Lindsay KnappAug 13, 2025
What to do if my EGO CH5500 doesn’t work and LED1 flashes red or all the LEDs go out?
- C
  christine57Aug 13, 2025
  If your EGO Battery Charger isn’t working and LED1 flashes red or all the LEDs go out, the battery pack or charger may be defective, or there may be a bad connection between the battery pack and charger. Here are some things to try: 1. Remove and reinsert the battery pack in the charger. 2. Try charging a different battery pack. 3. Unplug the charger and wait until the red LED goes out, then reconnect the plug to the power supply.
C
Chad WheelerAug 20, 2025
Why doesn't my EGO CH5500 work and LED1 shines red?
- D
  Dana MooreAug 21, 2025
  If your EGO Battery Charger doesn’t work and LED1 shines red, the battery pack may be too hot or too cold. Allow the battery pack to reach normal temperature. Charging will begin when the battery pack returns to a temperature between 37°F (3°C) and 135°F (57°C).