EGO Power+ CH5500 User Manual

EGO Power+ CH5500

68 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

WARNING: To reduce the risk of injury, the user must read and understand the

Operator’s Manual before using this product. Save these instructions for future reference.

OPERATOR’S MANUAL

56-VOLT

RAPID CHARGER

MODEL NUMBER CH5500/CH5500-FC

Español p. 45

Français p. 23

16-0531_EGO_CH5500_Rapid Charger_manual_NA_V1

Questions and Answers:

M
Michelle DickersonAug 3, 2025
What to do if my EGO Power+ CH5500 Battery Charger doesn’t work and LED1 flashes red or all the LEDs go out?
- N
  nmorenoAug 3, 2025
  If your EGO Battery Charger isn’t working and LED1 flashes red or all the LEDs go out, the battery pack or charger may be defective, or there may be a bad connection between the battery pack and charger. Here are some things to try: 1. Remove and reinsert the battery pack in the charger. 2. Try charging a different battery pack. 3. Unplug the charger and wait until the red LED goes out, then reconnect the plug to the power supply.
M
Mary BridgesAug 20, 2025
Why doesn't my EGO Battery Charger work and LED1 shines red?
- D
  Dale BarberAug 20, 2025
  If your EGO Battery Charger doesn’t work and LED1 shines red, the battery pack may be too hot or too cold. Allow the battery pack to reach normal temperature. Charging will begin when the battery pack returns to a temperature between 37°F (3°C) and 135°F (57°C).

EGO Power+ CH5500 Specifications

General

Brand	EGO
Model	Power+ CH5500
Category	Battery Charger
Language	English

Related product manuals

Preview: EGO CH5500

Preview: EGO Nexus PST3040

EGO Nexus PST3040