To Next Page

To Previous Page

56V RAPID CHARGER — CH5500/CH5500-FC 19

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

Charger doesn’t work.

LED1 ﬂashes red or all the

LEDs go out.

Battery pack or charger

is defective or bad

connection between the

battery pack and charger.

1. Try to remove and

reinsert the battery pack

in the charger.

2. Try charging a different

battery pack.

3. Unplug the charger

and wait until the red

LED goes out, then

reconnect the plug to

the power supply.

Charger doesn’t work and

LED1 shines red.

Battery pack is too hot or

too cold.

Allow the battery pack to

reach normal temperature.

Charging will begin when

battery pack returns to

37°F(3°C)-135°F(57°C).

Questions and Answers:

Need help?

Do you have a question about the EGO Power+ CH5500 and is the answer not in the manual?

EGO Power+ CH5500 Specifications

General