EDGER ATTACHMENT — EA0800/EA0800-FC 17
MAINTENANCE
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING: Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. To prevent serious personal injury,
take extra precautions and care when performing maintenance, service or for changing
the cutting attachment or other attachments.
WARNING: To prevent serious personal injury, remove the battery pack from
the power head before servicing, cleaning, changing add-on attachments or when the
product is not in use.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic, which may result in serious personal injury.
WARNING: When cleaning the edger attachment, DO NOT immerse in water or
other liquids.
CLEAN THE UNIT
◾
After each use, remove the battery and clean the debris, clogged soils or grass on
the blade and guard with a soft brush. Wipe the edger surface with a clean cloth
moistened with a mild soap solution.
◾
Use a small brush or a small vacuum cleaner to clean the air vents on the rear
housing.
◾
Keep the air vents free of obstructions.
To Next Page
Loading...
Need help?
General
