EasyManuals Logo

EGO LM2000 User Manual

EGO LM2000
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2000
24
maintenance
WARNING: To avoid serious personal injury, always remove the safety key and battery pack from the mower before
cleaning or performing any maintenance.
WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or
cause product damage. To ensure safety and reliability, all repairs should be performed by a qualied service technician.
CLEANING THE MOWER
WARNING: To reduce the risk of electric shock, do not expose the mower to water. Always remove the safety key and
battery pack when servicing or transporting the mower.
The underside of mower deck should be cleaned after each use, as grass clippings, leaves, dirt and other debris will
accumulate. This accumulation is undesirable, as it will promote rust and corrosion.
Remove any build-up of grass and leaves on or around the motor cover (do not use water). Wipe the mower clean with a
dry cloth.
REMOVING THE BLADE
WARNING: Always protect your hands by wearing heavy
gloves or wrapping the cutting edges with rags or other materials
when performing any maintenance on the mower blade. Always
remove the safety key and battery pack when servicing or
transporting the mower.
NOTICE: The following tools are required for replacing the blade:
adjustable or 9/16” (14mm) wrench and manual screwdriver or
other metal rod with diameter 7/16” (11mm) or less.
 Stop the motor and remove the safety key and battery pack
from the mower.
 Turn the mower on its side.
 While wearing protective gloves, place a metal rod (e.g.,
a manual screwdriver) into the xing hole to act as a
stabilizer (Fig. 21).
 Use an adjustable or 9/16 inch (14mm) wrench to turn the
blade bolt counterclockwise to loosen it.
 While still wearing protective gloves, remove the bolt,
washer and the blade (Fig. 22).
INSTALLING THE BLADE
WARNING: Always protect your hands by wearing heavy
gloves or wrapping the cutting edges with rags or other materials
when performing any maintenance on the mower blade. Always
remove the safety key and battery pack when servicing or
transporting the mower,
21
Tighten
Loosen
22
Washer
Bolt
Blade
Inner
Flange

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EGO LM2000 and is the answer not in the manual?

EGO LM2000 Specifications

General IconGeneral
BrandEGO
ModelLM2000
CategoryLawn Mower
LanguageEnglish

Related product manuals