EGO LM2000E Repair Guide Line

5. Turn the fan by hand to align the holes in the blade with the through holes in the fan.
6. Place a metal rod (e.g., a long bit) into the aligned holes to act as a stabilizer. Place another
metal rod (e.g., a manual screwdriver) into the fixing hole on the deck to act as another
stabilizer.
7. Use a 14mm torque wrench to tighten the bolt clockwise. The recommended torque for the
blade bolt is 49-59Nm.
Blade Installation
Align the holes
Stabilizer 2
Stabilizer 1
Tighten
14

EGO LM2000E Specifications

General

Brand	EGO
Model	LM2000E
Category	Lawn Mower
Language	English