EGO LM2000E Repair Guide Line

 Following the following steps below to test the ON/OFF function before any other
tests.
1) Fully extend the side rails and lock the two green clamps.
2) Turn the handle and lock it into one of the operating positions.
3) Insert a full charged battery pack, push the battery pack until you hear a “click”.
4) Insert the safety key, press and hold the key.
5) With the safety key depressed, pull the bail switch upward to the handle and release the
safety key to start the mower.
LM2000-S
3
Troubleshooting

EGO LM2000E Specifications

General

Brand	EGO
Model	LM2000E
Category	Lawn Mower
Language	English