EGO LM2000E - Safety Rules; Training and Preparation; Safe Operation Practices

Tool List For Repair
7
NO. Tool List SPEC Remark
1 Magnetic bits
#1 phillips
#2 phillips Remove the deep screw in the deck
2
Socket
13mm
For front/rear wheel bolt
14mm
For blade bolt
3
Flat head screwdriver
head width: 3mm
Loosen/tighten the terminal screws for
motor cables
4
Torque Wrench
14mm
Tighten the blade bolt.
5
Metal rod or manual
screwdriver
Act as a stabilizer when disassembling
the blade.
6 Electric Soldering Iron
7
Steel cable
Remove or assemble the big spring
8
Heat shrinkable sleeves
9
Diagonal Pliers
10
Scissors To remove the shrinkable sleeve