EGO LM2000E - Page 29

2. Lock the housing cover assembly to the deck with screws
a) Lock the back of the housing cover assembly with 2 screws (see slide 7)
b) Fold the handle, turn the mower on its side. Lock the housing cover assembly to the deck with
22 screws (see slides 9 to 11).
NOTE: Don’t forget to assemble the rubber gasket between the housing cover and the deck.
Description
Part Number
SPEC
Tapping Screw
5610042000
ST4.2x19-F-H
Rubber Gasket
3127738000
---
Housing Cover Assembly Replacement
Assembly
29
Rubber
Gasket