To Next Page

To Previous Page

56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC36

NOTICE: If the bolt rotates with the

motor shaft when loosening the bolt, turn

the fan by hand to align the through holes

in the fan with the holes in the blade,

and place another metal rod (e.g., a 3.5”

length screw bit) with diameter less than

1/4 inch (6.35mm) into the aligned holes

to act as another stabilizer (Fig. 23).

5. Continue using the 9/16 inch

(14mm) wrench to turn the blade

bolt counterclockwise to loosen it

completely.

6. While wearing protective gloves,

remove the bolt, outer ange and

the blade (Fig. 24).

INSTALLING THE BLADE

WARNING:

Always protect your

hands by wearing heavy gloves or

wrapping the cutting edges with rags

or other materials when performing any

maintenance on the mower blade.

Always remove the battery pack when

servicing or transporting the mower.

NOTICE: To re-install or replace the

blade, be sure to replace the parts in the

exact order in which they were removed

(Fig. 24).

1. Mount the inner ange to the fan (Fig. 25).

THIS SIDE FACING GRASS

Fan

Inner ange

Blade

Outer ange

Bolt

THIS SIDE FACING GRASS

Stabilizer 1

Loosen

Stabilizer 2

Questions and Answers:

Need help?

Do you have a question about the EGO LM2100 and is the answer not in the manual?

EGO LM2100 Specifications

General