56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2100SP/LM2100SP-FC/LM2100/LM2100-FC46
8. Re-install the rear wheel covers
(LM2100SP/LM2100SP-FC) and
rear wheels; be sure to replace
the parts in the exact order in
which they were removed
(Fig. 36a & 36b).
STORING THE MOWER
The following steps should be taken in
order to prepare the lawn mower for
storage.
1. Remove the battery pack from
the mower and store it at room
temperature in a dry location.
2. Clean the mower as described
earlier in the maintenance
section.
3. Inspect the blade and replace it or
sharpen it if required.
4. Lubricate the mower.
5. Store the mower in a dry, clean location. Do not store it next to corrosive
materials, such as fertilizer or rock salt.
6. Store the mower in a covered, enclosed space, that is cool and dry and out of the
reach of children.
7. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap
moisture around the mower, which causes rust and corrosion.
36a
Dust Cover
Rear Wheel
Round Recess facing outside
Wave Washer
Wheel Cover Locking Screw
Bolt
Wheel Cover
Wheel Axle
For LM2100SP/LM2100SP-FC
36b
Dust Cover
Bolt
Wheel Axle
Round Recess
facing outside
Wave Washer
For LM2100/LM2100-FC
Rear Wheel