56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2140SP/LM2140SP-FC48
Problem Cause Solution
Mower is
difficult to pull
back when the
self propel is
turned off
◾
The wheels are temporarily
locked.
◾
Simply push ahead slightly
and then move the mower as
desired.
The motor
works but the
blade doesn’t
cut the grass
◾
The blade is not tightened to the
required torque.
◾
Re-tighten the blade. The
recommended torque for the
blade bolt is 36-43 ft-lb (49-
59Nm).
Short running
time of the
mower with
included
battery
◾
Grass conditions and cutting
height setting will greatly affect
the battery run time. The claimed
run time is based on a light load
condition.
◾
Raise the blade height and slow
your pace to reduce the cutting
load.
To Next Page
Loading...
