56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 21
Variable-Speed Self-Propel
System (Fig.14)
This snow blower is equipped with
variable-speed self-propel capability.
This system is independent of the auger
On-Off switch; it is not dependent on
auger rotation. For example, when you
have completed cleaning of the driveway,
you can use the self-propel function to propel the snow blower to your storage location
without auger rotation.
To operate the self-propel system without auger rotation, press the self-propel trigger
to the handle.
To turn the self-propel function off, release the self-propel trigger.
The system has variable speed. To increase the speed, move the self-propel speed-
control lever forwards. To decrease the speed, move the self-propel speed control lever
backwards.
To move the snow blower backward, rst stop the self-propel function; pull the self-
propel speed-control lever all the way toward the back of the snow blower, then press
the self-propel trigger.
NOTICE: The speed is xed when operating the snow blower in reverse with self-
propel; the self-propel speed-control lever cannot change the speed in reverse.
NOTICE: The snow blower cannot be switched to move backward while the self-
propel function is moving it forward.
14
Self-Propel Speed-Control Lever
Self-Propel Trigger
To Next Page
Loading...
Need help?
General
