EGO SNT2400 User Manual

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC 23
To increase or decrease the distance
that the snow is thrown, pull the chute
deector handle backward or forward to
raise or lower the chute deector(Fig.17).
Once arriving at the desired chute
deector position, engage the chute
deector handle back into the locking slot.
LED SIDELIGHTS AND
HEADLIGHTS OPERATION (Fig.18)
The LED sidelights are located on both left
and right of the handle assembly. The LED
headlights are located on the front of the
deck.
Press the LED light button once to turn on
both the sidelights and headlights.
Press the LED light button twice to turn off
the sidelights.
Press the LED light button three times to
turn off all the lights.
NOTICE: All the LED lights will turn off
automatically if the snow blower is not
being operated within 5 minutes.
LED INDICATOR ON THE SNOW
BLOWER (Fig. 19)
The snow blower is equipped with a LED
indicator to indicate the charge level of
the battery pack(s) and the working status
of the snow blower.
17
Chute Deector Handle
Chute Deector
18
LED Sidelights
LED
Light
Button
LED Headlights
19
LED Indicator
LED Light Button

EGO SNT2400 Specifications

General

Stage Type	Two-stage
Clearing Width	24 inches
Battery Voltage	56 V
Auger Material	Steel
Drive System	Self-Propelled
Speed Control	Variable Speed
Intake Height	20 inches
Throwing Distance	50 feet
Number of Batteries	2
Chute Control	Remote
Speed Settings	Variable
Headlights	LED
Chute Rotation	200 degrees