EGO SNT2400 User Manual

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2400/SNT2400-FC32
MOUNTING AND DETACHING DRIFT CUTTERS
(AVAILABLE AND SOLD SEPARATELY)
1. Remove the batteries.
2. Insert the two bolts into the deck and mount the drift cutter and wing nuts onto
the bolts. Pre-tighten the wing nuts and keep the drift cutter a little loose for
adjustment (Fig. 31).
3. Move the drift cutters to the desired position (Fig. 32).
4. Tighten the wing nuts to secure the drift cutters.
3231
Wing Nut
Drift Cutter
Bolt

EGO SNT2400 Specifications

General

Stage Type	Two-stage
Clearing Width	24 inches
Battery Voltage	56 V
Auger Material	Steel
Drive System	Self-Propelled
Speed Control	Variable Speed
Intake Height	20 inches
Throwing Distance	50 feet
Number of Batteries	2
Chute Control	Remote
Speed Settings	Variable
Headlights	LED
Chute Rotation	200 degrees