EGO ST1300E - Line Not Cutting Well

56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1300E-S
13
EN
PROBLEM CAUSE SOLUTION
Grass wraps around
trimmer head and
motor housing.
◾ Cutting tall grass at ground
level.
◾ Cut tall grass from the top down, removing no
more than 20cm in each pass to prevent wrapping.
Line is not cutting
well.
◾ The line-cutting blade on the
edge of the guard has become
dull.
◾ Sharpen the line-cutting blade with a le or
replace it with a new blade.