16
Preparation
8.3 How to Use the Camera
1)Insert Micro SD card
Notice: Please use qualified Micro SD
card; format it on computer into
exFAT32k; neutral card may not function.
2)Install and take battery out
01 Draw the lid downwards and open it;
02 Put the battery in the camera
according to symbols of cathode and
anode, there are arrows pointing how
you should insert the battery;
03 Push the lid and take the battery out;
3)Charging
01 Plug it to computer or power adapter
to charge;
02 Plug it to a car charger to charge;
03 Film while charging (set it at car mode
from the function menu);
04 Charge when turned off;
05 Current should be kept within 1000mA
or it may cause damage;
6)Charging
01 Filming and image setting;
During filming, there is a symbol on top
left corner of screen; tap “CONFIRM” to
start filming; during filming, is flickering;
tap “CONFIRM” again to stop filming;
the symbol on top left disappears.
02 Photographing and settings;
Turn it on and you can see mode
selection; when there is on top left
corner of the screen, you can take a
picture; tap “CONFIRM” to take
pictures: stop motion/ self-timer
(2/5/10 seconds)/ continuous capture;
03 Save and play;
Use USB cable to move the videos to
your computer; you can also take the
Micro SD card out and read the data
on a computer with a card reader.
4)Turn on/off the camera
There is ON/OFF button on the front side
(tap to turn it on; long press to turn it off
and you can see GOODBYE on screen);
5)Mode swapping
After turning it on, tap the ON/OFF button
to film/ take a picture/ replay or convert
modes. is for filming; is for taking a
picture. The symbols are on the top of
screen. is for replaying. The last is for
the function menu.
Notice: After crash, take the battery out and put it back again to restore.
To Next Page
Loading...
