11
Preparation
5.Prop Guard
GHOST prop guard is made of intensified compound materials. Its lightness
contributes to better and safer flight, and protects the blades from strike.
5.1 Installation and Disassembly
Installation: Place the prop guard on GHOST and screw it down with three
2.0 screws.
Disassembly: Unscrew the three screws fastening the prop guard and take
the prop guards down.
6.Gimbal
GHOST Gimbal is anti-knock and anti-shake.
6.1 Gimbal Parameters
Weight: 178g
Precision: ±0.09°
Working voltage: 7V to 17V
Maximum angle: Roll angle ±55° Pitch angle -180° to +60°
Balance angle: Roll angle ±45° Pitch angle -90° to +30°
Supporting cameras: EHANG motion camera, Gopro3, Gopro3+ and Gopro4
To Next Page
Loading...
