12
Preparation
6.2 Installation
Gimbal Lower seat of Gimbal Camera
Camera prop guard 1.5 long screws 1.5 short screws
Step 1 Assemble the camera:
Use 1.5 long screws to fasten the camera
brace to the camera and 1.5 short screws to connect the camera (such as
GoPro) to the lower seat of Gimbal. (Notice: Parts must be fastened with
screwdriver).
Step 2 Install the upper seat of Gimbal:
Put the GHOST upper seat upwards,
use 2.0 screwdriver to fasten the upper seat to GHOST and cover the upper
seat with buffer balls.
Finished
Gimbal upper seat 2.0 short screws Buffer balls Finished
To Next Page
Loading...
