To Next Page
A
Angel TaylorAug 19, 2025
What to do if my Eiki EK-400X lamp fails?
- AAndrew HernandezAug 19, 2025
If the lamp fails, replace it and reset the lamp timer.
What to do if my Eiki EK-400X lamp fails?
If the lamp fails, replace it and reset the lamp timer.
What to do if the lamp in my Eiki EK-400X doesn't ignite?
Check the lamp connections and replace the lamp if needed.
What to do if my Eiki EK-400X Projector lamp extinguished during normal operation?
Check the lamp and power supply to resolve this issue.
What to do if the Eiki Projector detects the lamp end of life?
Replace the lamp with a new one.
What to do if the lamp extinguished during run-up phase in my Eiki EK-400X Projector?
Check the lamp connections and replace the lamp if necessary.
How to fix 'Lamp fail 1' error on Eiki EK-400X?
Check the lamp and replace it if necessary.
How to fix 'Lamp fail 2' error on Eiki Projector?
Check the lamp connections and replace the lamp if needed.
How to troubleshoot 'Restrike lamp fail 2' on Eiki EK-400X?
Replace the lamp.
What to do for 'Ballast over temp' error on my Eiki EK-400X?
Allow the ballast to cool and check for obstructions.
How to troubleshoot 'Restrike lamp fail 1' on Eiki EK-400X Projector?
Inspect the lamp and ballast connections.
Explains safety symbols and provides general operational safety guidelines.
Detailed guidelines on projector installation, handling, and electrical safety.
Procedures for powering the projector on and off.
Guide to setting up a password for unauthorized access prevention.
Instructions for setting the projector's height and tilt.
How to adjust zoom, focus, and correct keystone distortion.
Overview and operation of the OSD system for making adjustments.
Controls for adjusting display parameters like brightness and contrast.
Adjustments for color, sharpness, gamma, and video settings.
Settings for language, security, screen blanking, and splash logo.
Procedure to reset the projector's lamp hour counter.
Configuration for network connectivity and IP settings.
Introduction and details on wired LAN terminal functionality for remote control.
General tips, common problems, and diagnostic strategies.
Detailed technical specifications of the projector models.
General
