To Next Page
A
Annette HowardSep 9, 2025
Why is my Eiki EK-501W image mirror reflected?
- TThomas HansonSep 9, 2025
If the image on your Eiki Projector is mirror reflected, check the Ceiling and Rear settings.
Why is my Eiki EK-501W image mirror reflected?
If the image on your Eiki Projector is mirror reflected, check the Ceiling and Rear settings.
What to do if my Eiki EK-501W Projector detects an abnormal situation and cannot power on?
If your Eiki Projector detects an abnormal situation and won't power on, unplug the AC power cord and reconnect it before trying to power it on again. If it shuts down again, unplug the cord and contact your dealer or a service center for assistance. Continuing to operate it could lead to electric shock or fire.
Why does my Eiki EK-501W have no image?
Several factors could be the reason for no image display on your Eiki Projector. First, verify the connection between your projector and the computer or imaging equipment. Ensure the correct input signal is selected from the computer, as some notebooks may require display output setting adjustments. Note that it can take approximately 30 seconds for the initial image to appear. Also, check the signal mode, color system, image system, or computer system settings. Confirm that the ambient temperature is within the range of 41°F–95°F (5°C–35°C). Lastly, remember that the BLANK mode will prevent an image from displaying; check the BLANK button or other buttons on the remote controller.
Why is my Eiki EK-501W remote controller not working?
If your Eiki Projector's remote controller isn't working, there are several things to check. First, ensure the battery is working. Make sure there are no obstacles between the remote controller and the projector, and that you are within the maximum operation range of 5 meters. Verify that the remote controller and the projector are paired with the same remote control codes. Finally, check if the key lock of the remote controller is enabled in the Setup menu and release it if it is.
What to do if my Eiki Projector image looks dim?
If the image on your Eiki Projector appears dim, start by checking the contrast and brightness settings to ensure they are properly adjusted. Next, verify that the image mode settings are correct for your viewing environment. Also, check the lamp brightness settings. Finally, check for a lamp replacement alert, which indicates that the lamp is nearing the end of its life cycle and should be replaced with a new one of the same model.
How to fix fuzzy image on Eiki Projector?
To correct a fuzzy image on your Eiki Projector, begin by adjusting the focus. Ensure that you have provided the proper projection distance for clear viewing. If the issue persists, the projection lens may need cleaning. Also, if the projector has been moved from a cold environment to a warmer one, condensation may have formed on the lens; wait until the condensation evaporates before turning the projector on.
Why are some operations invisible on my Eiki Projector?
If some operations are invisible on your Eiki Projector, check the display function settings.
What to do if Eiki Projector image distorted?
If the image on your Eiki Projector is distorted or has disappeared, check and revise the PC Adj. menu or Screen menu.
What to do if Eiki EK-501W Projector control panel does not function?
If the control panel on your Eiki Projector is not functioning, disable the key lock on the control panel function in the Safety option of the Setup menu.
How to fix upside down image on Eiki Projector?
If the image on your Eiki Projector is upside down, check the Ceiling settings.
General| Projection Technology | DLP |
|---|---|
| Zoom Ratio | 1.2x |
| Projection Size | 30 - 300 inches |
| Brightness | 5000 ANSI Lumens |
| Input Connectors | HDMI, VGA, Composite Video |
| Resolution | 1280 x 800 (WXGA) |
| Lamp Life | 4000 hours (Normal mode), 6000 hours (Eco mode) |
