Eiki EK-800U Quick Start Guide

4
Quick Start Guide
• Use this document as a start guide when setting up the
projector.
• For detailed information about installation, setup and
operation for projector, refer to the owner's manual on the
CD-ROM.
Accessories List
Owner's Manual (CD)
EK-800U
AC Power cord
US Type*1 / Euro Type*1 /
China Type*1 for China
VGA cable Remote control
Batteries (AA or LR6)
Quick start guide
RoHS Card
for China
铅（Pb） 汞（Hg） 镉（Cd） 六价铬（Cr(VI)） 多溴联苯（PBB） 多溴二苯醚（PBDE）
光机引擎(
铝或铝镁合金)
X O O O O O
镜头
X O O O O O
灯泡
X X O O O O
点灯器
X O O O O O
弹片(快削磷铜)
X O O O O O
风扇组件
X O O O O O
灯泡盖保护开关
O O X O O O
温度开关
O O X O O O
基板组件
X O O O O O
缆线,线材
X O O O O O
电源线
X O O O O O
电源插座组件
X O O O O O
金属件(快削磷铜,铜钉等)
X O O O O O
遥控器
X O O O O O
产品中有毒有害物质或元素的名称及含量列表
╳：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006标准规定的限量要求。
备注：鉴于欧盟与中国对于RoHS的不同规定，本投影机产品符合欧盟RoHS指令(电气、电子设备中限制使用某些有害物质指令),本
表中标有"X"的所有部件均为欧盟ROHS指令所允许例外的部件。
依据中国政府针对“电子信息产品污染控制管理 办法＂为控制和减少电子信息产品废弃后对环境造成的污染，促 进
生产和销售低污染电子信息产品，保 护环境和人体健康，仅提供有关本产品可能含有有毒及有害物 质如后：
部件名称
有毒有害物质或元素
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006标准规定的限量要求以下。
QC Pass Card
for China
Warranty Card
for China
Warranty Card for USA Caution Card DVI-HDMI adapter
Turn on the projector Turn off the projector
ON OFF
21 3
54 6
87 9
Gamma Bright Cont. PIP
0
Info
Mode
Auto Source
Menu Exit
Focus Lens H
Enter
ON OFF
21 3
54 6
87 9
0
Info
Mode
Auto Source
Quick Start Guide
Accessories List
Turn on the projector Turn off the projector
How to install lens
EK-800U
EK-800U
X
Do not look into the lens
while the projector is turned on.
ATTENTION!
Once you change the "Standby Power mode" in the menu from
"Communication mode"(Default) to "0.5W mode", "Status" LED
will be off in standby mode.
You can notice the standby mode by Power LED on i n the Keypad.
*36.78905G001-A*
P/N 36.78905G001-A
3
4
5
How to install lens
1
2
3
+
-
+
-
ON
OFF
2
1
3
5
4
6
8
7
9
Gamma
Bright
Cont.
PIP
0
Info
Mode
Auto
Source
Menu
Exit
Hot Key
Shutter
(AV Mute)
Pattern
Focus
Lens H
Lens V
Keystone H
Keystone V
Zoom
Enter
ON OFF
21 3
54 6
87 9
Gamma Bright Cont. PIP
0
Info
Mode
Auto Source
Menu Exit
Focus Lens H
Enter
4
1. Remove the lens cap from the projector.
2. Remove both lens caps (front and back) on the lens.
3. Align the red dot label on the lens with the red dot
label on the lens mount.
4. Install the lens assembly into the lens mount.
5. Rotate the lens clockwise to lock the lens in
place.
1. Connect the necessary signal cable.
2. Connect the AC Power Cord.
3. Turn on the AC Power Switch.
4. Turn on the projector by pressing “ ” on the remote
control or press “ ” on the built-in keypad.
1. Press “ ” on the built-in keypad or
press “ ” on the remote control to turn
off the projector. A warning message
will appear on the displayed image.
2. Press “ ”/“ ” again to confirm your
selection.
2
1

Eiki EK-800U Specifications

General

Brand	Eiki
Model	EK-800U
Category	Projector
Language	English