To Next PageTo Next Page
Need help?Do you have a question about the EINHELL 40.100.50 and is the answer not in the manual?
General| Maximum operating pressure | 10 bar |
|---|---|
| Motor power | 1.1 kW |
| Number of cylinders | 1 |
| Tank volume | 50 L |
| Mains supply | 230 V |
| Voltage | 230 V |
General precautions for keeping the workspace clean and safe from environmental hazards.
Guidelines on protective clothing, eye protection, and avoiding personal injury.
Safe practices for operating, maintaining, and handling the compressor and its parts.
Advice on proper usage, extension cables, concentration, and specific safety checks.
Important points for setting up the compressor and general safety advice for its use.
Specific safety measures and restrictions when using the compressor for paint spraying.
Instructions for attaching wheels, rubber buffer, and installing filters.
Guidance on connecting the compressor to power and explanation of fittings.
An introduction to the maintenance and cleaning procedures for the compressor.
Procedures for checking and changing the compressor oil.
Instructions for cleaning the compressor's intake filter.
Information on the pressure switch settings and operation.
Details on possible causes of machine failure and their solutions.
Information required for ordering replacement parts for the compressor.
