EINHELL BG-BC 43/1 AS User Manual

BG-BC 43/1 AS
Art.-Nr.: 34.019.70 I.-Nr.: 11011
7
D Originalbetriebsanleitung
Benzin-Motorsense
GB Original operating instructions
Petrol Power Scythe
F Mode d’emploi d’origine
Débroussailleuse à moteur à
essence
S Original-bruksanvisning
Bensindriven röjsåg
NL Originele handleiding
Benzinemotorzeis
E Manual de instrucciones original
Desbrozadora con motor
de gasolina
P Manual de instruções original
Moto-roçadora a gasolina
FIN Alkuperäiskäyttöohje
Bensiinikäyttöinen moottoriviikate
RO Instrucţiuni de utilizare originale
Motocoasă pe benzină
GR Πρωτότυπες Οδηγίες χρήσης
Bενζινοκίνητο θεριστήρι
TR Orijinal Kullanma Talimatı
Benzin Motorlu Tırpan
IR
Anl_BG_BC_43_1_AS_SPK7.indb 1Anl_BG_BC_43_1_AS_SPK7.indb 1 03.08.12 13:1803.08.12 13:18

EINHELL BG-BC 43/1 AS Specifications

General

Displacement	42.7 cm³
Power Output	1.25 kW
Fuel Tank Capacity	1.2 L
Cutting Width (Blade)	25.5 cm
Cutting Width (Line)	46 cm
Engine Type	2-stroke

Summary

Safety Regulations

Explanation of the Warning Signs

Explains warning symbols on the equipment for safe operation.

Layout and Items Supplied

Layout

Provides a detailed diagram of the equipment components and their identification numbers.

Items Supplied

Lists all the accessories and parts included in the product packaging.

Intended Use

Technical Data

Assembly

Mounting the Blade Guard Hood

Instructions for attaching the protective guard for the cutting blade.

Joining the Drive Rod Mechanism

Steps for connecting the drive rod to the connecting piece of the scythe.

Fitting / Replacing the Cutting Blade

Procedure for installing or changing the cutting blade assembly.

Fitting the Cutting Line Guard Hood

Guidance on attaching the guard hood for the cutting line.

Fitting the Handle

Instructions for securely attaching the operating handle.

Fitting / Replacing the Line Spool

Steps for installing or changing the cutting line spool.

Before Starting

Fuel and Oil

Information on the correct type of fuel and oil mixture for the engine.

Operation

Starting with a Cold Engine

Step-by-step guide for starting the engine when it is cold.

Starting with a Warm Engine

Procedure for starting the engine when it has been recently used.

Switching Off the Engine

Instructions on how to safely stop the engine using normal or emergency procedures.

Fitting the Shoulder Strap

Guidance on properly fitting and adjusting the shoulder strap for user comfort and safety.

Work Practice

Recommendations for practicing work steps with the engine off before actual use.

Working with the Petrol Power Scythe

Extending the Cutting Line

Method for automatically extending the cutting line during operation.

Trimming/Mowing

Techniques for trimming grass and mowing with the scythe.

Cutting along Fences/Foundations

Advice on carefully cutting near obstacles like fences and walls.

Trimming around Trees

Techniques for trimming grass around tree trunks without damaging bark.

Mowing

Instructions for cutting vegetation down to the ground level.

Maintenance

Replacing the Line Spool/Cutting Line

Step-by-step guide for replacing the cutting line spool.

Grinding the Safety Hood Blade

Instructions for sharpening the blade integrated into the safety hood.

Maintenance of the Air Filter

Procedure for cleaning and maintaining the air filter to ensure optimal engine performance.

Maintenance of the Spark Plug

Steps for checking, cleaning, and replacing the spark plug.

Carburetor Settings

Guidance on adjusting the carburetor settings for optimal engine performance.

Cleaning, Storage, Transport and Ordering of Spare Parts

Cleaning

Instructions for cleaning the equipment after use to maintain its condition.

Storage

Procedures for storing the equipment safely, especially for extended periods.

Transport

Guidelines for safely transporting the petrol power scythe.

Ordering Spare Parts

Information required when ordering replacement parts for the equipment.

Disposal and Recycling

Troubleshooting Guide

Warranty Provisions