To Next PageTo Next PageWhat to do if my EINHELL Lawn and Garden Equipment motor does not start?
If the motor of your EINHELL Lawn and Garden Equipment doesn't start, there might be a few reasons. First, ensure that you press the engine brake lever. Also, check if the fuel tank is empty and top it up if needed. Make sure that the petrol cock is open. Finally, the spark plug might be defective, in which case you should replace it.
Why does my EINHELL BG-SC 2240 P Lawn and Garden Equipment engine not run smoothly?
If your EINHELL Lawn and Garden Equipment engine doesn't run smoothly, a likely cause is a dirty air filter, so you should clean it. Another possibility is a worn spark plug, which you should clean or replace. Also, check the choke lever position and set it to the “Run” position if it's open.
What to do if motor is running, but roller is not rotating in EINHELL BG-SC 2240 P?
If the motor is running but the roller isn't rotating on your EINHELL Lawn and Garden Equipment, the V-belt is likely torn. You should have the V-belt replaced by a customer service workshop.
How to fix intensive vibrations in EINHELL BG-SC 2240 P?
If your EINHELL Lawn and Garden Equipment doesn't operate smoothly and vibrates intensively, the blades are likely imbalanced. You should have the blades replaced by a customer service workshop.
General| Brand | EINHELL |
|---|---|
| Model | BG-SC 2240 P |
| Category | Lawn and Garden Equipment |
| Language | English |
Explains symbols used on the equipment for safe operation and maintenance.
Instructions for attaching push bars, debris box, and preparing for first use.
Step-by-step guide to start the engine and adjust throttle for operation.
Instructions on setting depth and tips for optimal scarifying techniques.
Instructions for cleaning, checking oil, changing oil, and cable adjustment.
Steps to prepare the scarifier for storage and transport.
