EasyManua.ls Logo

EINHELL BT-BC 10 E - User Manual

EINHELL BT-BC 10 E
72 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bedienungsanleitung
Batterie-Ladegerät
t
Operating Instructions
Battery Charger
p
Mode dʼemploi
Chargeur de batterie
C
Istruzioni per lʼuso
Carica batteria
lL
Betjeningsvejledning
Batterilader
U
Bruksanvisning
Batteriladdare
Bf
Upute za uporabu
Uređaj za punjenje baterije
4
Uputstva za upotrebu
Uređaj za punjenje baterije
j
Návod k obsluze
Nabíječka baterií
W
Návod na obsluhu
Nabíjačka batérií
Art.-Nr.: 10.508.50 I.-Nr.: 11053
BT-BC 10 E
Anleitung_BT_BC_10_E_SPK1__ 06.06.13 13:26 Seite 1

Table of Contents

Questions and Answers

  • R
    Raymond HoldenAug 9, 2025
    What to do if EINHELL BT-BC 10 E Battery Charger overload cut-out trips?
    • N
      Nicholas HillAug 9, 2025
      If the overload cut-out trips on your EINHELL Battery Charger, it could be due to several reasons. First, ensure that the charger clamps are connected correctly: the red clamp should be connected to the positive pole, and the black clamp to the bodywork. Second, check for contact between the charger clamps and prevent it. Finally, the battery itself might be defective, in which case you should have it checked by an expert and replaced if necessary.
  • M
    Mary KnightAug 25, 2025
    Why is the charging current indicator not working on my EINHELL BT-BC 10 E?
    • P
      Patrick HernandezAug 25, 2025
      If the charging current indicator on your EINHELL Battery Charger isn't working, there are a few potential causes. It could be due to poor contact between the charger clamps and the battery poles, so try cleaning the contacts and charger clamps. Alternatively, the battery itself may be defective, requiring an expert check and possible replacement. As a final check, the charging current indicator might be defective; try testing the equipment with a different battery to see if the indicator works.

Summary

1. Safety regulations

Waste disposal

2. Layout (Fig. 1)

3. Proper use

4. Technical data

5. Operation

Notes on automatic charging

Information on automatic charging for maintenance-free batteries and long-term battery maintenance.

Calculating the charging time

Formula to estimate battery charging time based on capacity and current, and factors affecting it.

6. Overload cut-out

7. Maintenance and care of the battery

8. Cleaning, maintenance and ordering of spare parts

8.1 Cleaning

Instructions for cleaning the equipment, including housing, air vents, and charging terminals.

8.2 Maintenance

Statement confirming no internal parts require additional maintenance.

8.3 Ordering replacement parts

Details required for ordering spare parts, such as type, article, and part numbers.

9. Disposal and recycling

10. Troubleshooting

EINHELL BT-BC 10 E Specifications

General IconGeneral
BrandEINHELL
ModelBT-BC 10 E
CategoryBattery Charger
LanguageEnglish

Related product manuals