EasyManua.ls Logo

EINHELL BT-BC 30 - User Manual

EINHELL BT-BC 30
80 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bedienungsanleitung
Batterie-Ladegerät
t
Operating Instructions
Battery Charger
p
Mode dʼemploi
Chargeur de batterie
C
Istruzioni per lʼuso
Carica batteria
lL
Betjeningsvejledning
Batterilader
U
Bruksanvisning
Batteriladdare
Bf
Upute za uporabu
Uređaj za punjenje baterije
4
Uputstva za upotrebu
Uređaj za punjenje baterije
j
Návod k obsluze
Nabíječka baterií
W
Návod na obsluhu
Nabíjačka batérií
Art.-Nr.: 10.781.00 I.-Nr.: 11040
BT-BC 30
Anleitung_BT_BC_30_SPK1__ 06.06.13 14:41 Seite 1

Table of Contents

Questions and Answers

  • J
    Jacob CunninghamJul 31, 2025
    What to do if the charging current indicator does not work on my EINHELL BT-BC 30?
    • D
      Deborah LangAug 1, 2025
      If the charging current indicator on your EINHELL Battery Charger isn't working, here's what could be happening: * Poor contact: Clean the contacts and charger clamps to ensure a good connection between the charger clamps and battery poles. * Defective battery: The battery might be defective. Have it checked by an expert and replaced if necessary. * Defective indicator: To check the equipment, use a different battery.
  • T
    twyattAug 15, 2025
    Why does the overload cut-out trip on my EINHELL BT-BC 30?
    • M
      Monique WrightAug 15, 2025
      The overload cut-out on your EINHELL Battery Charger may trip due to several reasons: * Incorrectly connected charger clamps: Ensure the red clamp is connected to the positive pole and the black clamp to the vehicle body. * Contact between the charger clamps: Prevent the clamps from touching each other. * Highly discharged battery: Select a lower charging current. * Defective battery: Have the battery checked by an expert and replace it if needed.

Summary

Safety Regulations

Personal Protective Equipment

Covers essential PPE like goggles and gloves, and appropriate clothing to prevent hazards.

Hazardous Environments and Materials

Addresses risks from explosive gases, battery acid, and the need for ventilation.

Electrical and Equipment Safety

Details safe usage, voltage compatibility, cable integrity, and battery type restrictions.

General Safety Precautions

Covers general maintenance, environmental, and usage restrictions.

Technical Data

Proper Use

Operation

Overload Cut-Out

Maintenance and Care of the Battery

Cleaning, Maintenance and Ordering of Spare Parts

Cleaning

Instructions for cleaning the equipment, including safety precautions.

Maintenance

Information regarding maintenance of the equipment and parts.

Ordering Replacement Parts

Details required information for ordering spare parts.

Troubleshooting

Guarantee Certificate

Warranty Terms and Conditions

Covers additional guarantee rights and legal warranty rights.

Scope of Guarantee

Details coverage for defects, exclusions, and non-applicability to commercial use.

Guarantee Period and Claims

Specifies the validity period and procedure for submitting guarantee claims.

Submitting a Guarantee Claim

Outlines the process for sending defective devices and proof of purchase.

EINHELL BT-BC 30 Specifications

General IconGeneral
Input Voltage230 V
Output Voltage12 V / 24 V
Boost StartYes
AmmeterYes
Suitable for BatteriesLead-acid batteries
Battery Type12 V
ProtectionShort-circuit
Charging TimeDepends on battery capacity

Related product manuals