EasyManua.ls Logo

EINHELL CC-BC 30/1 - User Manual

EINHELL CC-BC 30/1
116 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CC-BC 30/1
Art.-Nr.: 10.781.21 I.-Nr.: 21020
9
D Originalbetriebsanleitung
Batterie-Ladegerät
GB Original operating instructions
Battery charger
F Instructions d’origine
Chargeur de batterie
I Istruzioni per l’uso originali
Carica batteria
DK/ Original betjeningsvejledning
N Batterilader
S Original-bruksanvisning
Batteriladdare
CZ Originální návod k obsluze
Nabíječka baterií
SK Originálny návod na obsluhu
Batériová nabíjačka
NL Originele handleiding
Batterijlader
E Manual de instrucciones original
Cargador de batería
FIN Alkuperäiskäyttöohje
Akkulaturi
RUS Оригинальное руководство по
эксплуатации
Зарядное устройство
аккумулятора
SLO Originalna navodila za uporabo
Baterijski polnilec
H Eredeti használati utasítás
Akkumulátor-töltő készülék
GR Πρωτότυπες Οδηγίες χρήσης
Φορτιστικο μπαταριας
Anl_CC_BC_30-1_SPK9.indb 1Anl_CC_BC_30-1_SPK9.indb 1 21.07.2021 08:34:3221.07.2021 08:34:32

Table of Contents

Questions and Answers

  • C
    Courtney WarrenAug 8, 2025
    What to do if the charging current indicator does not work on my EINHELL CC-BC 30/1?
    • D
      David CampbellAug 9, 2025
      If the charging current indicator on your EINHELL Battery Charger isn't working, here's what could be happening: * Poor contact: Clean the contacts and charger clamps to ensure a good connection between the charger clamps and battery poles. * Defective battery: The battery might be defective. Have it checked by an expert and replaced if necessary. * Defective indicator: To check the equipment, use a different battery.
  • Y
    Yesenia RamirezAug 25, 2025
    Why does the overload cut-out trip on my EINHELL Battery Charger?
    • R
      Ryan Stewart DVMAug 25, 2025
      The overload cut-out on your EINHELL Battery Charger may trip due to several reasons: * Incorrectly connected charger clamps: Ensure the red clamp is connected to the positive pole and the black clamp to the vehicle body. * Contact between the charger clamps: Prevent the clamps from touching each other. * Highly discharged battery: Select a lower charging current. * Defective battery: Have the battery checked by an expert and replace it if needed.

EINHELL CC-BC 30/1 Specifications

General IconGeneral
Input Voltage230 V
Battery TypeLead-acid
Output Voltage12 V
Charging Current3 A
Charging Current (alternative)3.0 A
Charging TimeVaries based on battery capacity

Related product manuals