EINHELL CC-BC 5 - User Manual

72 pages

Go to English

Save Page as PDF

To Next Page

CC-BC 5

CC-BC 12

Art.-Nr.: 10.561.21 I.-Nr.: 11015

Art.-Nr.: 10.567.21 I.-Nr.: 11015

D Originalbetriebsanleitung

Batterie-Ladegerät

GB Original operating instructions

Battery charger

F Instructions d’origine

Chargeur de batterie

I Istruzioni per l’uso originali

Carica batteria

DK/ Original betjeningsvejledning

N Batterilader

S Original-bruksanvisning

Batteriladdare

HR/ Originalne upute za uporabu

BIH Punjač akumulatora

RS Originalna uputstva za upotrebu

Uređaj za punjenje baterija

CZ Originální návod k obsluze

Nabíječka baterií

SK Originálny návod na obsluhu

Batériová nabíjačka

Anl_CC_BC_5_12_SPK1.indb 1Anl_CC_BC_5_12_SPK1.indb 1 09.03.16 09:0109.03.16 09:01

Main Page

Questions and Answers

E
Elizabeth PhelpsAug 8, 2025
What to do if the charging current indicator does not work on EINHELL CC-BC 5?
- P
  Paul SmithAug 8, 2025
  If the charging current indicator isn't working, start by cleaning the contacts and charger clamps to ensure good contact between them and the battery poles. If that doesn't solve the issue, the battery might be defective and should be checked by an expert and replaced if needed. As a final step, test the equipment with a different battery to rule out a defective charging current indicator.
T
Todd RodriguezAug 25, 2025
Why does the overload cut-out trip on my EINHELL CC-BC 5 Battery Charger?
- S
  susancampbellAug 25, 2025
  The overload cut-out may trip for several reasons. First, ensure the red clamp is connected to the positive pole and the black clamp to the bodywork. Second, prevent any contact between the charger clamps. Third, if the battery is highly discharged, select a lower charging current. Finally, the battery may be defective, in which case you should have it checked by an expert and replaced if necessary.

Summary

Safety Regulations

Layout and Items Supplied

Layout (Fig. 1)

Identifies key components of the battery charger as shown in Figure 1.

Items Supplied

Lists all the components included in the packaging of the battery charger.

Proper Use

Technical Data

Before Starting the Equipment

Charging the Battery

Explains the step-by-step procedure for safely connecting and charging a vehicle battery.

Finishing Charging the Battery

Overload Cut-out

Maintenance and Care of the Battery

Cleaning, Maintenance and Ordering of Spare Parts

Cleaning

Details how to clean the battery charger equipment safely and effectively.

Maintenance

States that there are no internal parts requiring additional maintenance for the charger.

Ordering Replacement Parts

Instructs users on what information is needed to correctly order spare parts for the equipment.

Disposal and Recycling

Troubleshooting

EINHELL CC-BC 5 Specifications

General

Input Voltage	230 V
Output Voltage	12 V
Charging Current	3.5 A rms
Suitable for Battery Types	Lead-acid batteries
Weight	1.6 kg
Charging Modes	Automatic
Compatible Battery Types	Lead-acid batteries
Protection Features	Short-circuit protection, reverse polarity protection