To Next Page
S
Shannon EllisonAug 9, 2025
Why does the overload cut-out trip on my EINHELL BT-BC 8?
- PpturnerAug 10, 2025
The overload cut-out on your EINHELL Battery Charger may trip due to several reasons: * Incorrectly connected charger clamps: Ensure the red clamp is connected to the positive pole and the black clamp to the vehicle body. * Contact between the charger clamps: Prevent the clamps from touching each other. * Highly discharged battery: Select a lower charging current. * Defective battery: Have the battery checked by an expert and replace it if needed.
General
