Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care. Keep this manual in
a safe place, so that the information is available at all
times. If you give the equipment to any other person,
hand over these operating instructions and safety
regulations as well. We cannot accept any liability for
damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
1. Items supplied
앬 1 screwdriver with hammer action, 12 V/d.c.
앬 1 plastic carrying case
앬 Set of drive bits size 17, 19, 21 and 23 mm
(one of each)
앬 1 adapter cable
2. Technical data
Max. loosening torque 260 Nm
Operating voltage 12 V / d.c.
Current rating 5,5 A
Working range (max. thread size) M14
Sound power level L
WA
94 dB(A)
Vibration 4,4 m/s
2
Square drive mount 1/2“
Weight 1,7 kg
Please note:
Wear proper protective clothing whenever you
work with the hammer-action screwdriver.
Please observe the safety instructions.
3. Features
Item Description
1 ON/OFF switch
2 Reversing switch
3 operating LED
4 Square drive mount (mounting shaft)
5 12V connecting plug with internal fuse
6 adapter cable
4. Proper use
The hammer screwdriver is a handy d.c. tool
designed to be connected to a motor vehicleʼs 12 V
power supply for use in the automotive field. It is
suitable for fastening and releasing threaded
connections on motor vehicles (fitting tyres, etc.).
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Safety instructions
Practise these safety precautions to protect yourself
and your surroundings from accident hazards.
앬 Use the hammer-action screwdriver only as it is
intended.
앬 Keep tools out of the reach of children.
앬 Only begin work if you are well-rested and not
distracted.
앬 Disconnect the tool from the power supply before
beginning any trouble-shooting or maintenance
work.
앬 Use only original spare parts.
앬 Never run the tool at full idling speed with no load
for an extended time.
앬 Wear protective clothing whenever you work with
the screwdriver.
앬 Wear ear protection and gloves!
앬 This equipment is not designed to be used by
people (including children) with limited physical,
sensory or mental capacities or those with no
experience and/or knowledge unless they are
supervised by a person who is responsible for
their safety or they have received instructions
from such a person in how to use the equipment
safely. Children must always be supervised in
order to ensure that they do not play with the
equipment.
The corresponding safety information can be found
in the enclosed booklet.
5
GB
To Next Page
Loading...
Need help?
General
