Do you have a question about the EINHELL CC-HS 12 and is the answer not in the manual?
Reverse | Yes |
---|---|
Product type | Impact wrench |
Product color | Black, Red |
Noise level | 94 dB |
Torque (max) | 260 N⋅m |
Vibration level | 3.7 m/s² |
Idle speed (max) | - RPM |
Input power | 80 W |
Power source | AC |
Screw diameter | M14 |
Depth | 265 mm |
---|---|
Width | 100 mm |
Height | 275 mm |
Weight | 1440 g |
Package weight | 2830 g |
Diagram showing the main components of the hammer screwdriver with numbered parts for identification.
List of all accessories and parts included in the product packaging, including the screwdriver, case, bits, cable, and manual.
Details measured sound pressure and sound power levels, and vibration emission values as per EN 60745.
Advises wearing ear protection due to noise impact that can cause hearing damage.
Highlights potential residual risks and necessary precautions for safe operation of the electric power tool.
Guidelines for cleaning the tool, including recommendations for frequency and materials to use, emphasizing avoiding water ingress.
States that there are no internal parts requiring additional maintenance for the equipment.
Instructs users to quote specific machine details when ordering replacement parts and provides a website for information.
Lists conditions and damages that are not covered by the product warranty, such as wear parts and improper use.
Specifies that warranty terms apply to consumers for additional services beyond statutory rights, and are free of charge.
Explains that warranty covers material or manufacturing faults, limited to rectification or replacement at manufacturer's discretion.
Lists conditions not covered by the guarantee, such as incorrect installation, abuse, wear and tear, and external damage.
States the guarantee is valid for 24 months from purchase date, with claims submitted within two weeks of noticing a defect.
Provides instructions for registering defective devices online and the importance of proof of purchase for claim processing.