To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-CI 18 Li and is the answer not in the manual?
General| Idle speed (max) | 2300 RPM |
|---|---|
| Screw diameter (max) | 8 mm |
| Maximum torque (hard applications) | 140 N⋅m |
| Reverse | - |
| Soft grip | Yes |
| Product color | Black, Red |
| Vibration emission | 12.8 m/s² |
| Power source | Battery |
| Charging time | 1 h |
| Battery voltage | 18 V |
Weight and Dimensions| Depth | 343 mm |
|---|---|
| Width | 315 mm |
| Height | 110 mm |
Emphasizes reading instructions to reduce risks of injury and inquiry.
Mandatory use of safety goggles, ear protection, and breathing masks.
Store batteries in dry rooms between +10°C and +40°C, at least 40% charged.
Overview of the cordless hammer screwdriver components and their identification.
Checking that all items supplied match the scope of delivery.
Warning that packaging material is not a toy and poses suffocation risk.
Measured sound pressure, sound power levels, and vibration emission values.
Charge the battery pack using the supplied charger before initial use.
Use only suitable and faultless screwdriver bits for the task.
Check for concealed wiring, gas or water pipes before screwing into walls.
Instructions for removing and charging the Li battery pack using the charger.
Using the switch to set rotation direction and lock the On/Off switch.
Operating the On/Off switch for variable speed control and turning the tool on/off.
Interpreting the 3 LEDs to check the battery charge status.
Using the LED lamp for illumination in poor lighting conditions.
Procedure for inserting and removing screwdriver bits from the bit mount.
Advice on using self-centering screws and ensuring bit-screw compatibility.
Attaching the clip for belt hanging and its placement options.
Instructions for cleaning the equipment, including safety precautions.
Information on internal maintenance, stating no parts require additional service.
Data required for ordering spare parts and where to find information.
