Do you have a question about the EINHELL TC-CD 18-2 Li and is the answer not in the manual?
Number of gears | 2 |
---|---|
Torque settings | 19 |
Sound power level | 81.88 dB |
Chuck capacity (max) | 10 mm |
Screw diameter (max) | 6 mm |
Sound pressure level | 70.88 dB |
Idle speed (1st gear) | 350 RPM |
Idle speed (2nd gear) | 1250 RPM |
Sound level uncertainty | 3 dB |
Maximum torque (hard applications) | 38 N⋅m |
Product color | Black, Red |
Power source | Battery |
Charging time | 300 min |
Battery voltage | 18 V |
Battery capacity | 1300 Ah |
Chuck type | Keyless |
Built-in light | Yes |
Product design | Pistol grip drill |
Number of batteries included | 2 pc(s) |
Weight | 980 g |
---|---|
Package depth | 310 mm |
Package width | 97 mm |
Package height | 293 mm |
Package weight | 2900 g |
Read operating instructions to reduce risk; wear ear-muffs, breathing mask, safety goggles.
Maintain clean work area, proper electrical connections, and avoid hazards.
Stay attentive, use PPE, and ensure the tool is switched off before handling.
Proper use, avoid overloading, correct battery charging, and handling procedures.
Guidelines for battery charging, storage, and charger safety.
Diagram showing numbered components of the cordless drill/screwdriver.
Verify all included items and check for any shipping damage.
Measured noise and vibration values; recommendations for hearing protection.
Step-by-step guide for charging the Li battery pack.
Adjusting torque selection and changing between 1st and 2nd gear.
Using the On/Off switch, Forward/Reverse switch, and LED lamp.
Interpreting the LED indicators for battery charge and temperature.
Procedure for changing drill bits and tips, and tips for effective screwdriving.
How to clean the tool safely and effectively.
Information needed to order replacement parts.
Measured noise and vibration levels according to EN 60745 standards.
Details on warranty coverage, exclusions, and terms for Argentina.