To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TP-CW 18 Li BL-Solo and is the answer not in the manual?
General| Brand | EINHELL |
|---|---|
| Model | TP-CW 18 Li BL-Solo |
| Category | Power Screwdriver |
| Language | English |
Symbols for danger, hearing, breathing, and eye protection.
Guidelines for safe battery storage, including temperature and charge.
Adhere to safety info, instructions, and data to avoid electric shock, fire, or injury.
Retain all safety information and instructions for future reference.
Identifies components of the cordless hammer screwdriver as shown in Fig. 1.
Check for completeness of supplied parts; contact service if missing.
Suitable for loosening/tightening screws/nuts; misuse leads to user liability.
Not designed for commercial/trade use; warranty void if used in such applications.
Measured sound pressure, sound power, and vibration emission values.
Stated vibration values for comparison and exposure assessment.
Ensure correct drive socket inserts and check for hidden utilities before screwing into walls.
Steps for charging the Li battery pack using the charger unit.
Sets rotation direction and locks the On/Off switch.
Controls variable speed; press further for higher speed.
Displays battery charge status via LEDs.
Illuminates the work area when the On/Off switch is pressed.
Procedure for fitting/removing drive socket inserts.
Instructions for loosening screws/nuts with the impact driver.
Keep device clean; use damp cloth and mild soap; avoid solvents.
No internal parts require additional maintenance.
Information required for ordering spare parts via Einhell-Service.com.
Dispose of old equipment at designated collection points; do not use household refuse.
Store in a dark, dry place above freezing; ideal temperature 5-30°C.
Interprets Red/Green LED status for charging and faults.
Locate service partners and identify wear/consumable parts like batteries and bits.
Register problems online; provide precise description and answer troubleshooting questions.
Covers consumer use, material/manufacturing faults; excludes misuse and wear.
Register defects online with proof of purchase; details on repair or replacement.
Confirms compliance with relevant EU directives and standards.
Lists harmonized standards used for conformity assessment.
Declares compliance with UK standards and legislation for the product.
Lists British Standards (BS) applied for conformity assessment.
