To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TH-DY 500 E and is the answer not in the manual?
General| Idle speed (max) | 2200 RPM |
|---|---|
| Reverse | Yes |
| Dimensions (WxDxH) | 75 x 315 x 230 mm |
| Input power | 500 W |
| Cable length | 4 m |
| Power source | AC |
Weight and Dimensions| Weight | 1650 g |
|---|
Details the physical components of the drywall screw gun and lists all items included in the product packaging.
Defines the intended application of the drywall screw gun and restrictions on commercial use.
Explains how to adjust the depth setting ring for precise screw depth control, referencing Figure 2.
Details the procedure for safely removing and replacing the screwdriver bit or insert.
Offers advice on performing screwdriving tasks, including screw types and workpiece checks.
Explains how to turn the tool on, off, and engage continuous operation using the switch.
Describes how to vary the tool's speed and set the maximum speed limit.
Explains how to change the rotation direction of the screwdriver bit.
Warns about the danger of damaged power cables and the need for professional replacement.
Provides instructions for cleaning the tool and advises on checking carbon brushes.
States there are no internal parts requiring maintenance and lists information for ordering parts.
Provides guidelines for environmentally friendly disposal of the tool and its packaging.
Recommends optimal conditions for storing the tool and accessories to preserve them.
