To Next PageTo Next Page
Need help?Do you have a question about the EINHELL EURO 1500/1 and is the answer not in the manual?
General| Brand | EINHELL |
|---|---|
| Model | EURO 1500/1 |
| Category | Air Compressor |
| Language | English |
General instructions for operating the compressor.
German operating instructions for the compressor.
French operating instructions for the compressor.
Dutch operating instructions for the compressor.
Italian operating instructions for the compressor.
Importance of checking the oil level every 10 operating hours.
Adherence to the general operating instructions is mandatory.
Warning regarding dangerous electrical voltage and shock risk.
Caution against touching hot parts and surfaces.
Instruction to wear ear protection when operating the compressor.
Keeping the work area clean reduces accident risk.
Avoid physical contact with earthed parts to prevent electric shock.
Ensure the switch is OFF before connecting to power.
Check safety devices and parts for damage before use.
Only use accessories specified by the manufacturer for safety.
Notes on setting up the compressor, including checking for transit damage and oil level.
Precautions for processing paints and solvents, including flash points and ventilation.
Instructions for fitting the wheels to the compressor.
Guidance on attaching the rubber buffer to the support foot.
Steps for replacing the oil filter and installing the air filter.
Details on connecting the compressor to a 230V power supply.
Explanation of the various compressed air fittings on the unit.
Procedure for draining condensation water daily from the pressure vessel.
Instructions for actuating the safety valve to ensure functionality.
Importance of checking the oil level regularly between the red mark and sight-glass edge.
Steps for changing the oil, including recommended grade and intervals.
How to clean the intake filter to maintain compressor power.
Information on the factory-set pressure switch for start/stop points.
Identifies common causes of machine failure, such as motor overloading.
Details needed when ordering replacement parts, including machine type and article number.
Statement of conformity with EU directives and standards for the product.
Details of the 2-year warranty, conditions for claims, and statutory rights.
Instructions for disposing of electrical tools in EU countries according to directive.
