To Next PageTo Next PageWhat to do if my EINHELL Lawn Mower shows a battery error?
If the EINHELL Lawn Mower displays a 'Battery error', ensure the rechargeable battery is correctly fitted. Also, check that the main switch is turned ON while the lawn mower is in the charging station. If the issue persists, the rechargeable battery may have reached the end of its service life and needs replacement.
Why does my EINHELL Lawn Mower have no signal?
If your EINHELL Lawn Mower is not showing a signal, verify that the LED indicator at the charging station is lit up green. Ensure the perimeter wire is correctly laid and centrally positioned under the charging station. Also, check the position of the charging station and inspect the perimeter wire for any breaks.
What to do if my EINHELL Lawn Mower goes outside border?
If the EINHELL Lawn Mower is operating outside the border, make sure that the perimeter wire has been laid correctly and centrally under the charging station. Check that the robot lawn mower is inside the mowing area.
General| Cutting Width | 18 cm |
|---|---|
| Cutting Height Adjustment | 20 mm-60 mm |
| Battery Voltage | 18 V |
| Battery Type | Li-Ion |
| Power Supply | Battery |
Details the items included in the delivery and the process of unpacking the equipment.
Provides initial instructions for getting the robot lawn mower ready for use.
Explains the random movement pattern and detection of the perimeter wire.
Details the lifting, tilting, obstruction, and rain sensors and their functions.
Covers lawn preparation, object removal, and required tools for installation.
Guidance on finding the optimal location and orientation for the charging station.
Instructions for connecting the charging station to the power supply.
Details on how the mower charges and what the indicators mean.
Instructions for laying the perimeter wire on the ground and in the ground.
Guidance for laying perimeter wire in corners and narrow garden sections.
Instructions for installing perimeter wire on slopes and calculating gradients.
How to cordon off paths, driveways, and protect obstacles with perimeter islands.
Protecting obstacles and defining main/secondary mowing zones.
Operating the main switch and understanding control panel LEDs and buttons.
Adjusting the cutting height and using the locking mechanism with a PIN.
Configuring mowing times, starting, stopping, and managing the STOP status.
Instructions on how to clean the equipment safely and effectively.
Performing routine maintenance and procedure for replacing worn blades.
Steps to repair a severed perimeter wire using supplied connectors.
Information for ordering parts and guidelines for storing the equipment.
Recommendations for safely transporting the robot lawn mower.
Guidelines for environmentally friendly disposal of the equipment and packaging.
Explains LED indicators on the charging station and provides troubleshooting solutions.
Troubleshooting perimeter wire faults and battery errors based on LED indicators.
Interpreting alarm LED signals for faults like mower lifted, blocked, or sensor issues.
Explains charger LED indicators for ready, charging, adapted, and fault states.
Details on service partners, wear parts, and how to register product issues.
Explains the terms and conditions of the product guarantee and claim process.
