To Next PageTo Next PageWhat to do if my EINHELL FREELEXO SMART Lawn Mower shows 'Battery error'?
If your EINHELL Lawn Mower indicates a battery error, several factors could be at play. First, ensure that the rechargeable battery is correctly fitted. Next, verify that the main switch is turned ON while the lawn mower is docked in the charging station. Finally, if the issue persists, the rechargeable battery may have reached the end of its service life and may need replacing.
Why does my EINHELL FREELEXO SMART say 'No signal'?
If your EINHELL Lawn Mower is displaying a 'No signal' error, it could be due to a few reasons. The perimeter wire might not be properly connected, so check if the LED indicator at the charging station is lit up green. Another possibility is a power supply issue, in which case you should ensure the perimeter wire has been laid correctly and centrally under the charging station. Finally, the perimeter wire might be severed, so inspect the position of the charging station.
What to do if my EINHELL FREELEXO SMART goes 'Outside border'?
If your EINHELL Lawn Mower is going outside the border, it could be due to a couple of reasons. One possibility is that the perimeter wire is not properly connected; ensure it is laid correctly and centrally under the charging station. Another reason could be that the robot lawn mower is simply outside the mowing area; double-check that it is operating within the designated mowing area.
General| Cutting Width | 18 cm |
|---|---|
| Cutting Height | 20-60 mm |
| Battery Voltage | 18 V |
| Max. Slope | 35% |
| Battery Type | Lithium-ion |
| Motor Type | Brushless |
| Type | Robotic lawnmower |
Details the components of the robot lawn mower and its accessories.
Instructions for checking and unpacking the delivered equipment.
Explains the operational principle and navigation of the robot lawn mower.
Details the safety sensors and their functions, including rain and lifting sensors.
Outlines necessary preparations before installation, like lawn sketching and tool gathering.
Covers positioning and connecting the charging station for optimal operation.
Provides detailed instructions on laying the perimeter wire for garden boundary definition.
Explains how to connect the charging station to the power supply unit.
Guides the initial power-on and verification of the installation setup.
Instructions for turning the robot lawn mower on and off using the main switch.
Explains the functions of the control panel buttons and LCD display.
Guides on how to adjust the cutting height for optimal lawn mowing.
Details how to use the PIN for security and how to change or recover it.
Covers various settings like zones, mowing programs, rain sensor, and general preferences.
Covers manual operation, app control, and specific operating modes like SMART.
Details how to set up automatic mowing times and schedules.
Details the procedures and precautions for cleaning the equipment.
Covers essential maintenance tasks, including blade replacement and general checks.
Instructions for updating the robot lawn mower's software using a USB stick.
Guides on how to repair a severed perimeter wire using cable connectors.
Details the meaning of LED lights on the charging station and their corresponding solutions.
Lists common faults displayed on the LCD and provides solutions for each.
