To Next Page
B
Brian GarciaJul 27, 2025
What to do if my EINHELL FREELEXO+ Lawn Mower is stuck?
- MMelissa JacksonJul 27, 2025
If your EINHELL Lawn Mower gets stuck, it means the obstruction sensor has been tripped 10 times within one minute. Here's what to do: 1. Press the “OK” button to restart the robot lawn mower. 2. Check for any obstacles blocking the mower or if it's jammed between trees or bushes. Remove any obstructions or avoid these areas. 3. If the issue persists, examine the perimeter wire layout, paying close attention to tight angles, corridors, fences, and rocks. Adjust the wire if needed. 4. Also, check if the grass is too tall, blocking the mower. If so, mow the grass to below 60 mm.
General
Weight and Dimensions
