To Next PageTo Next PageWhat to do if my EINHELL FREELEXO CAM is flashing yellow because there is no GNSS signal?
If the EINHELL Lawn Mower is flashing yellow and there is no GNSS signal, ensure that the robot lawn mower is outside and that the GNSS signal is not being blocked.
Why is my EINHELL FREELEXO CAM Lawn Mower flashing green?
If the EINHELL Lawn Mower is flashing green because it is searching for a GNSS connection and calibrating the position of the charging station and the GNSS signal is not precise, wait for calibration to end. If the GNSS LED flashes permanently, the received signal is very weak (blocked by a building or tree) and the position of the charging station should be adapted.
General| Model | FREELEXO CAM |
|---|---|
| Category | Lawn Mower |
| Max Lawn Area | 600 m² |
| Battery Voltage | 18 V |
| Motor Type | Brushless |
| Battery Type | Lithium-ion |
| Wheel Size | 16 cm |
Important safety precautions and warnings for operating the equipment.
Step-by-step guide for installing the battery into the robot lawn mower.
Guidance on selecting the optimal location for the charging station.
Instructions for connecting the charging station to the power supply unit.
Guidance on creating clear boundaries for the mowing area.
Description of the control panel and its integrated LED display.
Steps to initiate the robot's mowing operation.
Regular maintenance tasks to keep the robot lawn mower in good condition.
