EINHELL GC-PM 47 S HW User Manual

GB
- 24 -
•
Petrol lawn mower
•
Mulching adapter
•
Push bar
•
Catch basket
•
Side ejector adapter
•
Cleaning scraper
•
Cable clip (1x)
•
Star nut (2x)
•
Screw (2x)
•
Washer (2x)
•
Spark plug wrench
•
Petrol service manual
•
Original operating instructions
•
Safety information
3. Proper use
The equipment may only be used for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
The petrol lawn mower is intended for private use
i.e. for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the machine is pri-
marily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the lawn mower is properly used
and maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Warning! Due to the high risk of bodily injury
to the user, the petrol lawn mower must not be
used to carry out the following work: Trim bushes,
hedges or shrubs, to cut scaling vegetation, plan-
ted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up
tree or hedge clippings. Moreover, the lawn mo-
wer may not be used as a power cultivator to level
out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind.
4. Technical data
GC-PM 47 S HW
Engine type ........One-cylinder four-stroke engine,
...................................................................139 cc
Power input: ..............................................1.8 kw
Working speed n
0
: ......................2850 ± 100 min
-1
Fuel: ............................................................ Petrol
Tank capacity: ..................................... approx. 1 l
Engine oil: ...........................approx. 0.5 l / 10W30
Spark plug: ................................................ F6RTC
Electrode gap (spark plug): ........... 0.7 ± 0,08 mm
Cutting height adjustment: ... Central, (25-70 mm)
Cutting width: .......................................... 470 mm
Weight: .........................................................39 kg
Danger!
Sound and vibration
L
pA
sound pressure level ..................... 81.2 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level .......................... 96 dB(A)
K
WA
uncertainty ........................................2.05 dB
Vibration emission value a
h
= 5.66 m/s
2
K uncertainty = 1.5 m/s
2
GC-PM 52 S HW
Engine type ........One-cylinder four-stroke engine,
...................................................................173 cc
Power input: ..............................................2.8 kw
Working speed n
0
: ......................2850 ± 100 min
-1
Fuel: ............................................................ Petrol
Tank capacity: ..................................... approx. 1 l
Engine oil: ...........................approx. 0.5 l / 10W30
Spark plug: ................................................ F7RTC
Electrode gap (spark plug): ........... 0.7 ± 0,08 mm
Cutting height adjustment: ... Central, (25-70 mm)
Cutting width: .......................................... 520 mm
Weight: .........................................................43 kg
Anl_GC_PM_47_52_56_S_HW_SPK7.indb 24Anl_GC_PM_47_52_56_S_HW_SPK7.indb 24 09.11.2015 13:53:0409.11.2015 13:53:04

EINHELL GC-PM 47 S HW Specifications

General

Type	Walk behind lawn mower
Drive type	Rear wheel drive
Cutting width	470 mm
Product color	Black, Grey, Red
Cutting system	Cylinder blades
Number of wheels	4 wheel(s)
Rotational speed	2850 RPM
Maximum lawn area	1400 m²
Fuel tank capacity	1.2 L
Handle(s) features	Soft grip
Engine displacement	139 cm³
Rear wheels diameter	280 mm
Front wheels diameter	200 mm
Maximum cutting height	70 mm
Minimum cutting height	25 mm
Grass collecting volume	75 L
Engine number of strokes	4
Number of height positions	6
Cutting clearance adjustment	Yes
Power source	Gasoline

Weight and Dimensions

Weight	37700 g
Package depth	460 mm
Package width	600 mm
Package height	910 mm
Package weight	42000 g